| ALUJET Dichtjet | |||||||||||||||||||
|
The ALUJET Dichtjet is used to build a connection betwen Steam breaker and the wall. standards DIN 4108-7, SIA 180 and Ö-Norm B8110-2 are fulfilled. |
Material: Acrylic adhesive included ethanol Colour: blau, opaque Freese up constant: up to -20° C
System components: ALUJET Dampfsperrfolie ALUJET Topjet ALUJET Alusan ALUJET Alucral |
||||||||||||||||||
|
|||||||||||||||||||
| ALUJET Alucral | |||||||||||||
|
The ALUJET Alucral is used for bonding vapor barrier/Steam break in the case of overlapping. Through the application of modified acrylates, adhesion is possible to start by -10 °C. |
Material: modified acrylate (solvent-free) Processing Termperature: start by -10 °C Temperature Resistance: -40 °C to +100 °C
System components: ALUJET Dampfsperrfolie ALUJET Topjet ALUJET Alusan ALUJET Dichtjet |
||||||||||||
|
|||||||||||||
| ALUJET Alusan | |||||||||||
|
The ALUJET Alusan is used for bonding vapor barrier/Steam break to permeations and connection to skylights. Through the application of modified acrylates, adhesion is possible to start by -10 °C.
|
Material: modified acrylate (solvent-free) Processing Termperature: start by -10° C Temperature Resistance: -40° C to +100° C
System components: ALUJET Dampfsperrfolie ALUJET Topjet ALUJET Dichtjet ALUJET Alucral |
||||||||||
|
|||||||||||
| ALUJET Difutape | |||||||||||
|
The ALUJET Difutape is used for bonding beathing membrane (for example: ALUJET Difujet) to permeations and the overlap. |
UV-Resistance: 4 Month Rain secure: yes Processing temperature: start by – 10 °C
System components: ALUJET Difujet USB ALUJET Difujet SBALUJET Nageldichtband |
||||||||||
|
|||||||||||
| ALUJET Super PE | ||||||||||||||||||||||
|
The adhesive tape, ALUJET Super PE, is used for sticking steam-brake foils, vapor barrier foils, practically vapor tight foils, and air seals between the overlap. Through this, airtightness, steam-break effectiveness, vapor barrier effectiveness and, accordingly, vapor tightness are produced. |
Instruct of glue: doublesided Processing temperature: start by +5 °C Adhesive Tape Cross-Section: ca. 6.5 mm² |
|||||||||||||||||||||
|
||||||||||||||||||||||
| ALUJET Super PE Plus | |||||||||||||
|
The adhesive tape, ALUJET Super PE Plus, is used for sticking steam-brake foils, vapor barrier foils, practically vapor tight foils, and air seals between the overlap. Through this, airtightness, steam-break effectiveness, vapor barrier effectiveness and, accordingly, vapor tightness are produced. The Acrylic glue system allows processing down to -37 °C |
Instruct of glue: doublesided Processing temperature: start by - 37° C Adhesive Tape Cross-Section: ca. 4.5 mm² |
||||||||||||
|
|||||||||||||
| ALUJET Nageldichtung | |||||||||||
|
The ALUJET Nageldichtung is used to seal the points of nails and tacker in the area between the strip of wood and the breathing membrane. The ALUJET Nageldichtung is not for a mechanical fixing. |
Installation: start by +4° C
|
||||||||||
|
|||||||||||
| ALUJET Allfixx | |||||||||||||
|
The ALUJET Allfixx is used in the inside and outside to build an connection between Steam Barrier and the building component or breathing membrane and the building component. It is usable as waterproofing for nails in roof components as well. |
Consistency: pasty |
||||||||||||
|
|||||||||||||